[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [St] Pannier bolt
- Subject: Re: [St] Pannier bolt
- From: Gavin Lawrie <gavin.lawrie@xxxxxxxxx>
- Date: Sun, 5 Aug 2007 00:01:46 +0100
On 3 Aug 2007, at 23:41, Gavin Lawrie wrote:
> Nonetheless, before putting bolt back I'm hoping to work out why
> the bolt sheared
Well, apparently the panniers should bolt to hangers using two
stainless / shouldered M8 bolts (as per postings earlier). The
failed bolt was aluminium (or some other soft alloy) and there was
only one of them (in the lower of the two mounting holes). Grrr!
Fair amount of grit / goo in upper mounting hole suggests it either
fell out long time ago or was never there... Unable to prize old
bolt stub out (in part because it is soft metal...) so have to put
new hanger and bolts in place.
Moral of story (if there is one) seems to be for anyone in UK at
least - be very careful about letting OYT work on your bike.
Anyhow - thanks again for your help on this one.
Regards
Gavin Lawrie
ST'03
-----------------------------
2GC Limited is a limited company registered in England and Wales.
Address: Albany House, Market Street, Maidenhead, Berkshire, SL6 8BE.
Contact: +44 (0) 1628 421506 // info@xxxxxxxxx
Registered number: 3754183.
Registered office:16, Wentworth Road, Oxford OX2 7TQ.
http://www.2gc.co.uk/
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com