[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST]
- Subject: Re: [ST]
- From: "Dan Wetherington" <DEW@xxxxxxxxxxxxx>
- Date: Wed, 13 Apr 2005 07:47:15 -0500
Remember, its a big nut and takes quite a bit of torque to break free.
You need a 46mm socket and at least a 24" (60-70cm) long breaker bar to
break it free. An extra set of hands is probably a good idea as
well...
Dan
>>> Frederic.Nizery@xxxxxxxxxx 4/13/2005 1:46 AM >>>
Hi everybody,
Has somebody any experience about dismentling the rear hub of the ST.
I saw on the maintenance schedule that the bearings should have some
grease
at 20Kkm. So as I am just done w/ the valve, coolant, break fluid and
so on.
I should now grease this one up.
After one try w/ unscrewing the huge nut (46mm), I failed. Too tighten
(I unlocked the nut first).
Given the encountered problem of one of the listers, I am kind of
convinced to do it.
Any help appreciated.
I only subscribed to the digest (to much time at work if otherwise). So
don't get mad at me
if a don't reply immediatly.
Thx
Fred 02STBRG
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.TriumphNet.com
www.packereng.com
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.TriumphNet.com