[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Brake Banjo's
- Subject: Re: [ST] Brake Banjo's
- From: "Rick & Joyce" <rnjwes@xxxxxxxxxxx>
- Date: Fri, 28 May 2004 08:21:15 -0700
The best-fitting tool I've found is a 9/16" line or flare wrench which is
slightly larger than 14mm.
After a heated 'conversation' with a Triumph Tech person as to the correct
tool for their removal, I replaced my OE banjo bolts with aftermarket 14mm
head SS ones and have never looked back. A web search for 10mm banjo bolts
will yield a number of sources. IIRC, ours are 10 x 1.25mm.
HTH,
Rick in Oregon
'01 Sprint ST
> 14mm or 9/16"?
>
> Seems my 14mm six point won't quite fit, but the open end 9/16 (and 12
point
> socket) just rounds her off. Retrieving the 9/16 six pointer from work
> tomorrow, but have a sneaking suspicion it's really 14mm + HAMMER.
>
> Maybe I need one of those "miracle" sockets (late night TV anyone?) that
> work on the flats of any nut.
> Thanks guys.
>
> Stan
>
>
>
>
>
>
>
> * * * * * * * * * * * * * * * * * *
*
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
>
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=