[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Swingarm Spool for RS to fit "Quick Stand?"
- Subject: Re: [ST] Swingarm Spool for RS to fit "Quick Stand?"
- From: "Andrew Tait" <antait@xxxxxxxxxxxxxxxx>
- Date: Wed, 4 Feb 2004 09:45:50 -0000
Hello,
- ----- Original Message -----
From: "Rick & Joyce" <rnjwes@xxxxxxxxxxx>
Subject: Re: [ST] Swingarm Spool for RS to fit "Quick Stand?"
> "Ken M." wrote:
> <snip>
> > Either I lever the bike up on the side stand and
> > have a friend lube the chain. . . <snip>
>
> A Speed Triple-riding friend has a piece of wood dowel which, when
> positioned under the right side of the frame near the front of the
> swingarm, is long enough to hold the rear wheel off the ground as Ken
> describes above. There's a piece of stiff wire at one end that hooks
> over the frame so when the bike is levered up onto the side stand, the
> dowel hangs from the frame in the correct position.
If ever I've wanted a photograph of something...
Andrew
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=