[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Penske Shock longer than stock....potential problems?
- Subject: Re: [ST] Penske Shock longer than stock....potential problems?
- From: "David W. Funk" <david.funk@xxxxxxxxxxx>
- Date: Thu, 22 Apr 2004 10:09:16 -0700
On Wed, 21 Apr 2004 13:28:12 -0700 (PDT), Bryce wrote:
>My stock shock is 365mm eye to eye. The new Penske
>shock with no ride height added measure 368mm eye to
>eye. I was told by Penske that the 3mm will make a
>difference, but a very small minute difference, making
>the bike turn in a smidgen quicker.
>
>Now while my goal was to have the turn in quicker i
>the first place, I'm not sure if I should send the
>shock back in order for them to make it EXACTLY 365mm
>eye to eye or not. I figure I have 12mm of ride
>height adjustment, why wouldn't the Penske shock be
>365 just like the stocker and then adjust from there?
>
You could easily lose 3mm with pre-load adjustment. Just make it a
little softer.
David W. Funk
'00 Triumph Sprint ST
Pleasanton, CA
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=