[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
[ST] GenMar set screws
- Subject: [ST] GenMar set screws
- From: "Jack Hays" <rude@xxxxxxxxxxxx>
- Date: Mon, 17 Mar 2003 12:20:46 -0600
Jean Louis Doublet wrote: the Gen-Mar risers have two little allen screws
each to hold the inner washer/cylinder in place. They are on the outside of
the lower part of the bars. These have an amazing tendecy to
loosen.........
BTW, if you hear a pop when rolling the bike and applying the front brake
check these screws. I looked everywhere last year and finally noticed the
left bar was slightly moving and found that set screw lose. I tightened
with LocTite and the pop went away.
Jack "Rude Dog" Hays
972-952-5065
"I'll see you on the Dark Side of the Moon"
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=