[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: Injection Mapping/CO Question...
- Subject: Re: Injection Mapping/CO Question...
- From: Eric Sheley <eric@xxxxxxxxxx>
- Date: Fri, 09 Jul 1999 13:55:22 -0400
>At 10:15 AM 07/09/1999 -0400, Brian Wolfe wrote:
>So I just got The Dark Side back after having the stainless performance
>can installed. They reset the CO but the guy who knew how to get the
>downloads for the ignition maps decided to leave for Laguna before
>telling anyone how to do it at the shop. So: I'm running the stock map
>with the pipe.
doh!...
>My question is does the CO need to be reset again after the new map is
>loaded?
spoke to a couple people and they all recommended. It may turn out that no
change is necessary, but as the fuel mapping is changing that is the
possibility that the percentage will change.
>Dyno results before and after with stock map: small increase in
>horsepower in the middle of the curve. Little spike at the top end.
>Dealer didn't include torque results.
that would be expected. You opened up the exhaust, but the ECM is still
operating in the stock, restricted mode.
When you get the new tune loaded, can you send me the stock and new
pipe/tune dyno runs?
- - Eric
* * * * * * * * * * * * * * * * * * *
The ST Mailing list is sponsored by the Unofficial ST Website
http://www.TriumphNet.com/st for ST and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=