[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: [ST] Marc's socket



Thanks for the heads up.

I have a trick: I take a beer crate and tape screws, washers etc on it
in the order they come off, and label with a pen next to it if I think
I'll forget.

I managed to strip the plastic off the back of the bike like that, and
there were all sorts of different size screws, clips, bolts etc.

Of course if you have beers in the tray to empty first things can get a
little challenging!


Cheers


marc 

-----Original Message-----
From: st-bounces@xxxxxxxxxxxxxxxxxxxx
[mailto:st-bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Jack Hays
Sent: Wednesday, August 23, 2006 4:36 PM
To: st-triumphnet.com@xxxxxxxxxxxxxxxxxxxx;
st-triumphnet.com@xxxxxxxxxxxxxxxxxxxx
Subject: [ST] Marc's socket

Marc, remember that there are two washer/spacers under the nut.
Be sure and re-install them correctly are you will have issues.
I lay mine down on the bench with the far side pointing down and in the
order they come off.
That way I pick up the furthermost one, install it as I pick it up, and
then repeat on the other.
Hand tighten the nut as you slightly wiggle the wheel to seat it, torque
to
107 foot pounds, and align as needed to install the safety clip.



Jack Hays
972-952-5065
"I'll see you on the dark side of the Moon"

_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com
_______________________________________________
Triumph Sprint ST/RS mailing list
Send list posts to ST@xxxxxxxxxxxxxx
Change your list options at www.Triumphnet.com