[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] front axle bolt size?
- Subject: Re: [ST] front axle bolt size?
- From: "Big Riff" <big_riff@xxxxxxxxxxx>
- Date: Wed, 21 May 2003 09:21:54 -0400
My 2001 uses a 19mm monster hex wrench (Allen type) for the front axle. The
caliper mounting bolts are not Torx on my 2001 - they are regular 12 or 13mm
bolts (Can't remember exactly off the top of my head). I can't remember the
torque specs at all, but I can post them for you tonight when I get home and
have access to the manual...
John in NJ
'01 BRG ST
>Hey all,
>
>My '99 uses a 24mm socket for front axle removal, what does the 2000+
>need?
>
>Secondly, did we figure out which years had Torx on the front caliper
>mounting bolt, and which had allen?
>
>Lastly, do all years spec the same torques for bolts related to wheel
>removal?
>
>Gathering info to help some buds on other model year ST's.
>
>aTdHvAaNnKcSe,
>
>--
>
> ._O_. '99 SprintST -mine
> -Bil- /_\o/_\ '98 VFR800FI -hers /~\
>"No I don't want a pickle..." /H\ '89 Hawk GT -ours ASCII \ /
>Against
> bil@xxxxxxxxxx (=O=) AMA, CMH-Moto, Ribbon X HTML
>"Drink Real Ale" "Quch!" #3 U DoD(6.66), HSTA! Campaign / \ Mail
>
>
> * * * * * * * * * * * * * * * * * *
> *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=