[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] chain
If I remember correctly, a while back there was a thread about sprocket
changes and 1 tooth down in the front is the same as 3 teeth up in the rear.
I could be wrong but I think that was the response. I have thought about
doing the same thing but am waiting for the chain to wear out and do it at
the same time.
John Mathis
CSBA #287
www.christiansportbike.com
Florida Chapter
aka Florida Dawg
- ----- Original Message -----
From: "Colt4530" <colt4530@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Sunday, April 20, 2003 10:37 PM
Subject: Re: [ST] chain
> I've already thought of that and have a 17 tooth front to put on.
> However, I noticed I only have one "spot" of chain adjustment left and
> hoped to gain some back with a larger rear sprocket. I also wanted to
> get more than 5% increase in RPM. That's why I started looking at +3 on
> the rear, or 7%. I borrowed a friends Mechanical Engineering Handbook.
> Maybe it has enough information to calculate the chain length
difference.
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=