[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Help! Throttle grip assembly.....
- Subject: Re: [ST] Help! Throttle grip assembly.....
- From: "Mike Bostock" <mike@xxxxxxxxxxxxxx>
- Date: Sat, 19 Oct 2002 22:06:34 +0100
In your message regarding [ST] Help! Throttle grip assembly..... dated Sat, 19
Oct 2002 13:51:11 -0700, Scott.Fehr@xxxxxxxxxxxx said that ...
>S- I am installing my Triumph heated grips on my 01 ST and am having a
>S- show-stopper problem. After I installed the right grip and re-assembled
>S- the switch housing, the throttle tension is all out whack. It doesn't
>S- retract, just stays twisted down (read: permanent cruise control). I think
>S- I've got the throttle cable properly in place and I've tried adjusting it
>S- using the throttle adjustment, but can't get it to behave normally.
Does it behave properly when the end weight is off the bar end?
I had to put a washer (spacer) between the bar end weight and the handlebar as
the heated grip was 0.5 mm too long :-(
- --
Mike Bostock
http://www.toothfairy.co.uk/
Wales & SW ST Riders
http://www.sprint-st.org/
'99 Red ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=