[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] suspension setup
- Subject: Re: [ST] suspension setup
- From: "Eric Mann" <eric91z@xxxxxxxxx>
- Date: Sat, 4 May 2002 23:50:01 -0500
- ----- Original Message -----
From: "Steve Duncan" <xhippy@xxxxxxxxxxx>
To: <ST@xxxxxxxxxxxxxx>
Sent: Saturday, May 04, 2002 8:50 PM
Subject: Re: [ST] suspension setup
> >Oh, it wouldn't hurt to check the steering head bearing tension
> >either.
> >HTH,
> >-Rick in Oregon
> >'01 Sprint ST
> >"NO Dawg"
> _______________________________________________________________________
>
>
> My guess is that this is the culprit! I had similar problems. Check by
> letting the bike deaccelrate from 50mph on down, hands off the bars, (be
> careful here), if you get headshake, say around 40-35 or so, you got's a
> loose steering head bearing.
>
Yes, this does happen, but only riding solo. And the front and rear track
absolutely perfectly riding 2 up and no headshake riding 2 up.
>
> STeve Duncan
> "Loco Dawg"
> '00 Sprint-ST, Black as Nite
> Dallas, Tx
> xhippy@xxxxxxxxxxx
Eric Mann
eric91z@xxxxxxxxx
'91 Camaro Z28
'01 Triumph Sprint ST
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=