[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Tightening up the mirrors
- Subject: Re: [ST] Tightening up the mirrors
- From: Wesley Horner <wesman@xxxxxxxxxxxxxxxxxx>
- Date: Wed, 19 Sep 2001 13:39:33 -0700
On Wed Sep 19 at 07:19:43 PM, STeve Duncan wrote:
> ________________________________________________________________________
>
> Well James there is at least ONE way to tighten your mirrors. The rubber
> cushion washers that hold the mirror on have a hole down the middle, you
> need measure this inside diameter and get an appropriate size tap. Tap
> threads inside (make sure and tap threads on both the top and bottom
> washers) then screw in a bolt. Tighten to snug. This should help the
> "looseness" but may introduce some vibration at certain speeds. I have done
> this to one mirror with no ill effects.
Do the mirrors still fold back in that arrangement?
wes
- --
~~~~wesman@xxxxxxxxxxxxxxxxxx~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My old sig was about Vaxen and VMS but I can't even figure out
the name of the company that owns them anymore.
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=