[Author Index]
[Date Index]
[Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
Re: [ST] Pit Bull Stand
- Subject: Re: [ST] Pit Bull Stand
- From: jhseltzer <jhseltzer@xxxxxxxx>
- Date: Sat, 10 Mar 2001 08:14:42 -0800
Hi Erik,
Strange, I have a Pit Bull forklift front with the converter and don't have nay
trouble at all. I have plenty of lift. I have a stock 2000 ST.
jhs
Erik Miner wrote:
> Just got my front end stand from Pit Bull. Very nicely made only one
> problem. You can't lift the front of the bike with it!!
> Unfortunately there isn't enough clearance between the bottom of the
> rear tire and the ground ( when the bike is on the center stand) Now
> it can be made to work by removing the rear tire since then there'll
> be plenty clearance. The other option of course is to buy the Pit
> Bull rear stand.. I could also put a 2" X something under the center
> stand but as someone mentioned FORGET about lifting the bike up on to
> it by ones self.
>
> Erik
>
> * * * * * * * * * * * * * * * * * * *
> The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
> http://www.TriumphNet.com/st/lilley for more info
> http://www.TriumphNet.com/st for ST, RS and Mailing List info
- --
John H. Seltzer
2906 Alvarado Drive
Bellingham WA 98226
360-647-7702
jhseltzer@xxxxxxxx
* * * * * * * * * * * * * * * * * * *
The ST/RS Mailing list is sponsored by Jack Lilley Ltd.
http://www.TriumphNet.com/st/lilley for more info
http://www.TriumphNet.com/st for ST, RS and Mailing List info
=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=