[Author Index] [Date Index] [Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]

Re: Windshield vibration



> >bodywork. I was going to install the heated grips this morning but did
not
> >complete the job. Got all of the retainers I could find off the upper
> >fairing and still seemed to be missing something so I put it back
together
> >rather than risk breaking something because I missed a fastener.
>
> It's not really that bad. Remove mirrors and windshield. Remove 10 bolts
> securing cockpit assembly to the fairing subframe - four of which are on
> the under side of the light area (2 silver and 2 black). Once these are
> removed the fairing can be coaxed as one piece (2 sides and the center)
> from the sub frame. Once you have it out a few inches, remove the 2 plugs
> from the lights and the plug for the center lamp. Just take it slow and
you
> should have no problem.
>
> - Eric
Sounds like I had all the right hardware off, 6 allen heads on the outer
surface of the fairing, 4 under the headlights (2 black 2 silver),
windshield, mirrors. I tried to slide the whole assembly forward at that
point but something still seemed to be holding it in place.

Paul


 *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
 The ST Mailing list is sponsored by the Unofficial ST Website
   http://www.TriumphNet.com/st for ST and Mailing List info

=-=-=-= Next Message =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=